Sun StorEdge S1 Array Support Expertise

Independent Sun StorEdge S1 Array Support Expertise



Sun StorEdge S1 ArrayThe Sun StorEdge[tm] S1 array is an ideal solution for rack-intensive environments where fast data transfers, efficient space utilization, and compatibility with a wide range of Sun[tm] servers are critical concerns. The device delivers excellent performance - up to 160MB/sec. throughput - while its 1U form factor, compact footprint, and a variety of rack options allow it to fit neatly into standard rack environments. Rack-optimization features such as front-to-back airflow, front-accessible hot-swap disks, front and rear LEDs, and 12-meter cabling help enable better utilization of precious rack space and help make servicing easier. The Sun StorEdge S1 array works with a variety of Sun Netra[tm] and general-purpose workgroup and enterprise servers. And together with Sun's other rack-optimized 1U servers and PCI system expander, the Sun StorEdge S1 array supports modular computing, helping companies to balance performance, storage capacity, and PCI connectivity - affordably.

Architecture

  • Carrier Features : Supports 19-in., 23-in., 24-in., and 600-mm rack configurations, with fixed-rail options; Flame-resistant, fireproof metal enclosure; NEBS Level-3 Certified
  • Status and sensors : Device and drive status information accessible from host server Front and rear LEDs for system and drive status
  • LVD/SE (160/40 MB/s) SCSI : Standard ANSI (X3.131-1994, X3.277-1996, SPI-3X3.252); Maximum cable length 12 meters for LVD and 3 meters for SE; SCSI; Direct connect to host on-board SCSI port with no host adapter
 

Disk Drives

  • Form factor : 3.5-inch low-profile, LVD
  • Supported drives : 18.2 GB or 36.4 GB, 10,000 rpm
 

Software

  • Sun Solaris[tm] 2.6 Operating Environment and higher
  • Sun[tm] Cluster 3.0 (with Netra T1 AC200/DC200, Netra E1 PCI System Extender, and Sun StorEdge S1 array)
  • Remote monitoring through Storage Subsystem Manager software
 

Supported Platforms

  • Netra T1 AC200/DC200
  • Netra t 1120/1125
  • Netra t 1400/1405
  • Netra ct 400/800
  • Sun Enterprise[tm] 220R/420R
  • Sun Fire 280R
  • Sun Fire 15K
 

Environment

  • AC or DC
  • 100-240 V AC, single-phase (47-63 Hz)
  • -48/-60 V DC
  • Less than 2 A at 100V AC (150 W)
  • Less than 4 A at -40V AC (150 W)
  • 5 C to 40 C (41 F to 104 F), 5% to 85% relative humidity, noncondensing (not to exceed 0.024 kg water/kg of dry air)
  • -5 C to 55 C (23 F to 131 F), 5% to 90% relative humidity, noncondensing (not to exceed 0.024 kg water/kg of dry air)
  • -40 C to 70 C (-40 F to 158 F), 90% maximum relative humidity, noncondensing
  • Less than 60dBa (GR-63-CORE Test Method)
  • Meets GR-63-CORE requirements for earthquake risk zone 4
  • 150 W, 512 BTUs/hr
 

Regulations

  • Safety : UL/CSA-60950, EN60950, IEC950 CB Scheme with all country deviations
  • RFI/EMI : EN55022/CISPR22 Class B, FCC CFR47 Part 15 Class B, EN61000-3-2, EN61000-3-3, EN 300 386 V1.2.1 (2000-03) - Telecom Center Only
  • Immunity : EN55024, EN 300 386 V1.2.1 (2000-03) - Telecom Center Only
  • Telcordia NEBS : GR-63-CORE, GR-1089-CORE, SR-3580 Level-3
  • Regulatory Markings : CE, FCC, ICES-003, C-tick, VCCI, GOST-R, BSMI, EK, UL/cUL, TUV-GS
  • Telcordia : NEBS Level-3
 

Key Applications

  • Tier 1 : Web caching; Video streaming; Domain name device; Incremental storage for horizontal scaling; Firewall; Web hosting; Authentication
  • Tier 2 : Simple boot device; Incremental storage for application servers; Mail/messaging; Network management; Softswitch; Billing
  • Tier 3 : Simple redundant boot device
 

Dimensions And Weight

  • Height : 44 mm (1.73 in.)
  • Width : 436 mm (17.16 in.)
  • Depth : 450 mm (17.71 in.)
  • Weight : 8.8 kg (19.4 lb.)